Chapter 3 Instruction Tables
3-5
3.2.3 Applied Instructions (Sorted Alphabetically)
The descriptions:
: The initial of the instruction name
: The applied instruction number
～: The instruction names
If the 16-bit instruction can be used as the 32-bit instruction, a D is added in front of the 16-bit
instruction to form the 32-bit instruction.
If the 32-bit floating-point number instruction can be used as the 64-bit floating-point number
instruction, a D is added in front of the 32-bit floating-point number instruction to form the 64-bit
floating-point number instruction.
: indicates that the instruction can be used as the pulse instruction, whereas ─ indicates that it
can not.
If users want to use the pulse instruction, they only need to add a P in back of the instruction name.
: The function
To Next Page
Loading...
