AH500 Programming Manual
6-104
Example 3:
1. Suppose the value in S
1
is 500.0, the maximum source value in D0 is 3000.0, the minimum
source value in D2 is 200.0, the maximum destination value in D4 is 500.0, and the minimum
destination value in D6 is 30.0. When X0.0 is ON, SM685 is set to ON, the instruction DSCLP
is executed, and the scale value is stored in D10.
2. The operation equation: D10=[(500.0–200.0)×(500.0–30.0)]÷(3000.0–200.0)+30.0=80.35
80.35 is rounded off to the nearest whole digit, and becomes 80.0. 80.0 is stored in D10.
To Next Page
Loading...
