AH500 Programming Manual
6-142
API
Instruction code
Operand Function
0402 GOEND
─
Jumping to END
Pulse instruction 16-bit instruction (1 step)
32-bit instruction
AH500
Symbol:
Explanation:
1. When the condition is met, the execution of the program jumps to END in the program.
2. Function blocks and interrupt tasks do not support the instruction. Besides, the instruction can
not be between the instruction FOR and the instruction NEXT.
3. When the instruction GOEND is executed, the instructions skipped are not executed, the data
in all devices is unchanged, and the states of all devices are also unchanged.
To Next Page
Loading...
