Delta AH500 - Page 34

Chapter 2 Devices
2-15
SM Function
CPU5X0-RS2
CPU5X0-EN
CPU5X1-RS2
CPU5X1-EN
CPU560-EN2
OFF

ON
STOP

RUN
RUN

STOP
Attribute
Default
from bit 0.
SM610
It is the matrix bit search flag. When the
matching bits are compared, the comparison
stops immediately, and SM610 is ON.
○ ○
○ ○ ○
OFF – – R OFF
SM611
It is the matrix pointer error flag. When the
value of the pointer exceeds the comparison
range, SM611 is ON.
○ ○
○ ○ ○
OFF – – R OFF
SM612
It is the matrix pointer increasing flag. The
current value of the pointer increases by one.
○ ○
○ ○ ○
OFF – – R/W OFF
SM613
It is the matrix pointer clearing flag. The current
value of the pointer is cleared to zero.
○ ○
○ ○ ○
OFF – – R/W OFF
SM614
It is the carry flag for the matrix
rotation/shift/output.
○ ○
○ ○ ○
OFF – – R OFF
SM615 It is the borrow flag for the matrix shift/output. ○ ○
○ ○ ○
OFF – – R/W OFF
SM616
It is the direction flag for the matrix
rotation/shift. The bits are shifted leftward when
SM616 is OFF, whereas the bits are shifted
rightward when SM616 is ON.
○ ○
○ ○ ○
OFF – – R/W OFF
SM617 The bits with the value 0 or 1 are counted. ○ ○
○ ○ ○
OFF – – R/W OFF
SM618 It is ON when the matrix counting result is 0. ○ ○
○ ○ ○
OFF – – R/W OFF
SM619 It is ON when the instruction EI is executed. ○ ○
○ ○ ○
OFF OFF - R OFF
SM620
When the results gotten from the comparison
by using the instruction CMPT# are that all
devices are ON, SM620 is ON.
○ ○
○ ○ ○
OFF – – R OFF
SM621
It sets the counting mode of HC0.
(HC0 counts down when SM621 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM622
It sets the counting mode of HC.
(HC1 counts down when SM622 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM623
It sets the counting mode of HC2.
(HC2 counts down when SM623 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM624
It sets the counting mode of HC3.
(HC3 counts down when SM624 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM625
It sets the counting mode of HC4.
(HC4 counts down when SM625 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM626
It sets the counting mode of HC5.
(HC5 counts down when SM626 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM627
It sets the counting mode of HC6.
(HC6 counts down when SM627 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM628
It sets the counting mode of HC7.
(HC7 counts down when SM628 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM629
It sets the counting mode of HC8.
(HC8 counts down when SM629 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM630
It sets the counting mode of HC9.
(HC9 counts down when SM630 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM631
It sets the counting mode of HC10. (HC10
counts down when SM631 is ON.)
○ ○
○ ○ ○
OFF – – R/W OFF
SM632
It sets the counting mode of HC11. (HC11
counts down when SM632 is ON.)
○ ○
○ ○ ○
OFF – - R/W OFF
SM633
It sets the counting mode of HC12. (HC12
counts down when SM633 is ON.)
○ ○
○ ○ ○
OFF – - R/W OFF