AH500 Programming Manual
6-246
Additional remark:
1. If the value in S is less than 0, the instruction is not executed, SM0 is ON, and the error code in
SR0 is 16#2003.
2. If S+n-1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error
code in SR0 is 16#2003.
3. If n is less than 2, or if n is larger than 512, the instruction is not executed, SM0 is ON, and the
error code in SR0 is 16#200B.
4. The instruction SFWR can be used with the instruction SFRD to write and read the data.
To Next Page
Loading...
