Delta AH500 - Page 419

Chapter 6 Applied Instructions
6-251
Additional remark:
1. If the value in S is less than 0, the instruction is not executed, SM0 is ON, and the error code in
SR0 is 16#2003.
2. If S+n exceeds the device range, the instruction is not executed, SM0 is ON, and the error
code in SR0 is 16#2003
3. If S+(The value in S)+1 exceeds the device range, the instruction is not executed, SM0 is ON,
and the error code in SR0 is 16#2003.
4. If n is larger than the value in S, the instruction is not executed, SM0 is ON, and the error code
in SR0 is 16#200B.
5. If n is less than 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#200B.