Delta AH500 - Page 495

Chapter 6 Applied Instructions
6-327
BIN
Binary value
F
LT
Floating-point
number
Binary-coded
decimal value
FRAD
Floating-point
number
Floating-point
number
FTAN
R56
45
0
0 5
4
R0.785398
X1.15~X1.0
D0
D11~D10
D21~D20
R1
D31~D30
Additional remark:
1. If the value in S exceeds the range of values which can be represented by the floating-point
numbers, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2013.
2. If SM695 is ON, and the value in S is less than 0 or larger than 360, the instruction is not
executed, SM0 is ON, and the error code is 16#2003.