Delta AH500 - Page 497

Chapter 6 Applied Instructions
6-329
Binary value
Floating-point
number
Binary-coded
decimal value
Floating-point
number
Floating-point
number
BCD
DINT
FDEG
0
0 5
4
Y1.15~Y1.0
90
R45
D21~D20
R1
D0
R1.570796
D11~D10
FASIN
D31~D30
Additional remark:
1. The floating-point number specified by the operand S should be within the range between –1.0
and +1.0. If the floating-point number is not within the range, the instruction is not executed,
SM0 is ON, and the error code in SR0 is 16#2003.
2. If the value in S exceeds the range of values which can be represented by the floating-point
numbers, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2013.