Chapter 6 Applied Instructions
6-355
and 9.), the operation error occurs, SM0 is ON, and the error code in SR0 is 16#200D.
2. If the value in S is not within the range between 0° and 360°, the operation error occurs, SM0
is ON, and the error code in SR0 is 16#2003.
3. If the value in S is equal to 90° or 270°, the operation error occurs, SM0 is ON, and the error
code in SR0 is 16#2003.
4. If users declare the operand D in ISPSoft, the data type will be ARRAY [3] of WORD/INT.
To Next Page
Loading...
