Delta AH500 - Chapter 12 Network Module AH10 PFBM

Chapter 6 Applied Instructions
6-369
executed, SM0 is ON, and the error code in SR0 is 16#2003.
2. If S
1
+2, S
2
+2, or D+2 exceeds the device range, the operation error occurs, the instruction is
not executed, SM0 is ON, and the error code in SR0 is 16#2003.
3. If users declare the operand S
1
in ISPSoft, the data type will be ARRAY [3] of WORD/INT.
4. If users declare the operand S
2
in ISPSoft, the data type will be ARRAY [3] of WORD/INT.
5. If users declare the operand D in ISPSoft, the data type will be ARRAY [3] of WORD/INT.