Delta AH500 - 12.3 Installation; 12.3.1 Installing AH10 PFBM -5 A and PLC CPU to the Main Rack

Chapter 6 Applied Instructions
6-373
Additional remark:
1. If S+2 exceeds the device range, the instruction is not executed, SM0 is ON, and the error
code in SR0 is 16#2003.
2. If D+2 exceeds the device range, the instruction is not executed, SM0 is ON, and the error
code in SR0 is 16#2003.
3. If the value in S exceeds the range, the operation error occurs, the instruction is not executed,
SM0 is ON, and the error code in SR0 is 16#2003.
4. If the values in S
1
~S
3
exceed the range, the operation error occurs, the instruction is not
executed, SM0 is ON, and the error code in SR0 is 16#2003.
5. If users declare the operand D in ISPSoft, the data type will be ARRAY [3] of BOOL.