Delta AH500 - Chapter 13 PROFIBUS Slave Module AH10 PFBS

Chapter 6 Applied Instruction
6-427
7. If the number of devices starting from S
2
is not equal to the value in S
3
, the instruction will not
be executed, SM0 will be ON, and the error code in SR0 will be 16#2003.
8. If the value in D
2
is not in the range of 0 to 6, the instruction will not be executed, SM0 will be
ON, and the error code in SR0 will be 16#2003.
9. If the value in D
2
is 6, and the number of devices starting from D
1
is not equal to the value in
D
2
+1, the instruction will not be executed, SM0 will be ON, and the error code in SR0 will be
16#2003.
10. If the value in S
2
is in the range of 1 to 5, and the quantity of data received is greater than the
number of devices starting from D
1
, the data which can not be stored will be ignored.
11. If a completion flag is ON, the PLC will stop receiving data. If a communication port receives
data when a completion flag is ON, the data will not be received.
12. If the setting value in S
3
is less than 0 or greater than 1000, the instruction will not be executed,
SM0 will be ON, and the error code in SR0 will be 16#2003.