Delta AH500 - Page 626

AH500 Programming Manual
6-458
Example 2:
Suppose the data in D0~D2 is as follows. When the PLC runs, the value in L0 is 5.
D0
16#45 (E)
16#44 (D)
D1
16#54 (T)
16#4C (L)
D2
16#00 (Ending character)
16#41 (A)
Additional remark:
If the string does not end with 16#00, the instruction is not executed, SM0 is ON, and the error code
in SR0 is 16#200E.