Delta AH500 - Page 749

AH500 Programming Manual
7-30
Error
code
Description
LED indicator status
CPU
MODULE
BUS FAULT ERROR
16#A0F5
The node address of AH10COPM-5A is set
incorrectly.
Blinking OFF
16#A0F6
Internal error: An error occurs in the manufacturing
process in the factory.
Blinking OFF
16#A0F7
Internal error: GPIO error
Blinking OFF
16#A0F8
Hardware error
Blinking OFF
16#A0F9
Low voltage
Blinking OFF
16#A0FA
An error occurs in the firmware of AH10COPM-5A.
Blinking OFF
16#A0FB
The transmission registers in AH10COPM-5A are
full.
Blinking OFF
16#A0FC
The reception registers in AH10COPM-5A are full.
Blinking OFF