4. Unscrew the Sub-1G antenna.
5. If no new Sub-1G antenna is to be tted, screw on the
cover cap of the Sub-1G connection.
11.10.3 Installing the Sub-1G antenna
Keep the cover cap of the Sub-1G connection.
1. Unscrew and remove the cover cap of the Sub-1G con-
nector.
11 Replacing or cleaning components, installing accessories
Installing/replacing type 2 combined AC surge protection devices
136
Installation and Operation Manual M50A_260 RPI503M260000 Product version L and M EU V1.3 EN 2023-08-14
To Next Page
Loading...
