Delta M50A-260 - Commissioning with the Mydeltasolar App; Direct Connection between Mobile Device and Inverter; Mobile Device Connected to Inverter Via DC1 Data Collector

85
8 Commissioning
Commissioning with the MyDeltaSolar app
Installation and Operation Manual M50A_260 RPI503M260000 Product version L and M EU V1.3 EN 2023-08-14
8.3 Commissioning with the MyDeltaSolar
app
8.3.1 Direct connection between mobile device
and inverter
Prerequisites
During installation, the Wi-Fi module was installed on the inverter
(see
“11.11 Installing/replacing the Wi-Fi module”, page 139).
The MyDeltaSolar app is installed on the mobile device (smart-
phone, tablet with iOS or Android).
Procedure
1. Launch the MyDeltaSolar app.
2. Follow the instructions in the app to connect your mobile
device to the inverter.
3. Once the connection is established, follow the instructions
in the commissioning procedure.
8.3.2 Mobile device connected to inverter via
DC1 data collector
Prerequisites
The inverter is connected to the DC1 (see “6. Planning the Com-
missioning”, page 51)
The MyDeltaSolar app is installed on the mobile device (smart-
phone, tablet with iOS or Android).
1. Launch the MyDeltaSolar app.
2. Follow the instructions in the MyDeltaSolar app to connect
your mobile device to the DC1.
3. Once the connection is established, follow the instructions
in the commissioning procedure.