EasyManuals Logo

Denon AVR-1509 Owner's Manual

Denon AVR-1509
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
1
Press SURR. PARA.
Parameter is displayed.
2
Use ui to select which parameters to adjust.
Only those parameters which can be adjusted under the current
playback status are displayed.
3
Use o p to adjust the parameters.
Repeat steps 2 and 3 to set each parameter.
Adjusting the Parameters
n To exit adjustment
Press SURR. PARA during adjustment.
If no adjustment is made for a period of about 5 seconds, the
adjustments made up that point are registered and the AVR-1509
returns to the original mode.
Surround Parameter
Adjust surround sound parameters.
The parameters (items) which can be adjusted differ
depending upon the following conditions.
Whether an input signal is present (when playing) or not
(when stopped, etc.).
The type of input signal
The type of surround mode
For details of which parameters can be adjusted in each
surround mode, see “Surround Modes and Parameters”
(vpage 43, 44).
a Mode
s Cinema EQ
d D. Comp (Dynamic Range Compression)
f LFE
g Center Image
h Panorama
j Dimension
k Center Width
l Delay Time
A0 Effect Level
A1 Room Size
A2 SW ATT (Subwoofer Attenuation)
A3 Subwoofer
A4 Tone Control
A5 Bass
A6 Treble
A7 MultEQ
A8 Dynamic EQ
A9 Dynamic Volume
S0 DV Setting (Dynamic Volume Setting)
S1 RESTORER
S2 Night Mode
S3 Default
Parameter
uio p
[NIGHT]
DYNAMIC
VOLUME
MULTEQ
RESTORER
o p
SURR. PARARESTORER MULTEQ
DYNAMIC VOLUME
ui
uiop
[CINEMA]
[MUSIC]
SURR. PARA
[Front] [Rear]
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual

Getting Started Connections Setup Playback Remote Control Information Troubleshooting
ENGLISH
Specifi cations

Table of Contents

Other manuals for Denon AVR-1509

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1509 and is the answer not in the manual?

Denon AVR-1509 Specifications

General IconGeneral
Power Output75 W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Number of Channels5.1
HDMI Inputs2
HDMI Outputs1
Response Bandwidth10Hz-100kHz
Signal-To-Noise Ratio98 dB
Total Harmonic Distortion0.08%
Input Impedance47 kOhm
Input Sensitivity200 mV
Tuner TypeDigital
Tuner BandsAM/FM
Preset Station Qty56
HDMI SwitchingYes
Output Impedance / Channel8 ohms
Frequency Response10Hz-100kHz
Digital Audio Inputs2 Optical, 1 Coaxial
Dolby FormatsDolby Digital, Dolby Pro Logic II
DTS FormatsDTS, DTS Neo:6
Surround Sound EffectsVirtual Surround
Audio D/A Converter192kHz/24-bit
Output Power / Channel75 W
Tuner Frequency RangeFM: 87.5-108 MHz, AM: 522-1611 kHz
Video Inputs/OutputsComponent video input (2), Component video output (1), Composite video input (4), Composite video output (2)
Analog Audio Inputs/Outputs4 Analog Audio Inputs, 1 Analog Audio Output

Related product manuals