Denon AVR-4810CI - Restoring All the Settings to as They Were at the Time of Purchase (Resetting the Microprocessor)


Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsTroubleshooting
Restoring All the Settings to as They were at the
Time of Purchase (Resetting the Microprocessor)
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
1
Turn off the power using <POWER>.
2
Press <POWER> while simultaneously pressing <STANDARD> and <DSP
SIMULATION>.
3
Once the display starts ashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
<POWER>
<DSP SIMULATION><STANDARD>