Denon AVR-4810CI - Playing Network Audio, USB Memory Devices


Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsPlayback
Tuning in Radio Stations – HD Radio Technology
NOTE
If the station signal weakens while receiving a digital broadcast (while
“ ” and text is displayed), the mode automatically switches to the
analog reception mode (the reception frequency is displayed).
Because of this, the “ ” indicator and text may flicker if the station
signal level is weak and unstable.
Check the HD Radio Reception Information
Press <STATUS> while an HD Radio broadcast is being
received.
The current reception information is shown on the display.
q Normal
↓
w Frequency / Signal strength
↓
e Long station name / Program and Program type
↓
r Title name / Artist name
↓
t Album name / Genre name
This procedure can be used to play Internet radio stations or music
or still picture (JPEG) files stored on a computer or USB memory
device.
Playing Network Audio, USB
Memory Devices
About the Internet Radio Function
Internet radio refers to radio broadcasts distributed over the Internet.
Internet radio stations from around the world can be tuned in.
The AVR-4810CI is equipped with the following Internet radio
functions:
Stations can be selected by genre and region.
Up to 56 Internet radio stations can be preset.
Internet radio stations in MP3 and WMA (Windows Media Audio)
format can be listened to.
Your favorite radio stations can be registered by accessing an
exclusive DENON Internet radio URL from a Web browser on a
computer.
The function is managed for individual users, so you must provide
your MAC or e-mail address.
Exclusive URL: http://www.radiodenon.com
The radio station database service may be suspended without
notice.
The AVR-4810CI’s Internet radio station list is created using a radio
station database service (vTuner). This database service provides a
list edited and created for the AVR-4810CI.
•
•
•
•
•
b
b
•
Important Information
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
<STATUS>