Denon AVR-4810CI - Selecting the Surround Mode (Surround Mode); Standard Playback


Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsPlayback
Surround Playback of 2-channel Sources
q The mode switches as shown below each time STANDARD is
pressed.
n
DOLBY PLgz
DOLBY PLgx
DOLBY PLg
DTS NEO:6
neural
: The signals are decoded in DOLBY PL
gz for
playback.
: The signals are decoded in DOLBY PL
gx for
playback.
: The signals are decoded in DOLBY PL
g for
playback.
: The signals are decoded in DTS NEO:6 for
playback.
: It is possible to play analog input signals and
PCM (2-channel, 48 kHz or less) in the surround
mode.
This is the optimum mode for playing sources
recorded in XM HD Surround (vpage 121).
z1 : This can be set when “Amp Assign” – “Extra Channel” is set
to “FH” and “Speaker Configuration” – “Front Height” is set to
something other than “None”.
z2 : This can be set when “Amp Assign” – “Extra Channel” is set to
“SB” and “Speaker Configuration” – “Surround Back” is set to
something other than “None”.
w Select the mode for the source at “Mode” (vpage 90).
Cinema
Music
Game
Pro Logic
Height
: This mode is suited for movie sources.
: This mode is suited for music sources.
: This mode is suited for games.
: This is the Pro Logic playback mode. This can
be selected when playing with a DOLBY PLg
decoder.
: This is the Front Height playback mode. Set
“Front Height” to “ON” (vpage 91).
The modes that can be selected depend on the input source being
played.
b
q Playing Sources According to the
Sources’ Audio Signal Format/
Number of Channels
(Standard Playback)
1
Playing the source (vpage 66).
2
Press STANDARD to select the surround mode.
Operations
The selectable surround modes depend on the following:
Format of the audio signals being input
Number of channels of the audio signals being input
The set amplifier assignment (vpage 41)
•
•
•
z
1
z
2
Selecting the Surround Mode (Surround Mode)
Input signal
The indication contents of
the display
DOLBY DIGITAL
(other than 2ch) /
DOLBY DIGITAL EX
DOLBY DIGITAL
DOLBY DIGITAL EX
DOLBY DIGITAL+PLgx CINEMA
DOLBY DIGITAL+PLgx MUSIC
DOLBY DIGITAL+PLgz
DOLBY DIGITAL Plus
DOLBY DIGITAL+
DOLBY DIGITAL + +EX
DOLBY DIGITAL + + PLgx CINEMA
DOLBY DIGITAL + + PLgx MUSIC
DOLBY DIGITAL + + PLgz
DOLBY TrueHD
DOLBY TrueHD
DOLBY TrueHD+EX
DOLBY TrueHD+PLgx CINEMA
DOLBY TrueHD+PLgx MUSIC
DOLBY TrueHD+PLgz
DTS (5.1ch) /
DTS-ES Discrete 6.1 /
DTS-ES Matrix 6.1 /
DTS 96/24
DTS SURROUND
DTS+PLgx CINEMA
DTS+PLgx MUSIC
DTS+PLgz
DTS+NEO:6
DTS ES MTRX6.1 (z1)
DTS ES DSCRT6.1 (z2)
DTS 96/24 (z3)
DTS-HD
DTS-HD HI RES
DTS-HD MSTR
DTS-HD+NEO:6
DTS-HD+PLgx CINEMA
DTS-HD+PLgx MUSIC
DTS-HD+PLgz
DTS EXPRESS
PCM (multi ch) /
DSD (multi ch)
MULTI CH IN
MULTI IN+Dolby EX
MULTI IN+PLgx CINEMA
MULTI IN+PLgx MUSIC
MULTI IN+PLgz
MULTI CH IN 7.1
z1 : This is displayed when the input signal is “DTS-ES Matrix 6.1”
and the AVR-4810CI’s “AFDM” (vpage 91) setting is set to
“ON”
z2 : This is displayed when the input signal is “DTS-ES Discrete
6.1”.
z3 : This is displayed when the input signal is “DTS 96/24”.
For details, see page 126.
Displaying the Currently Playing Surround Mode
Surround Playback of Multi-channel Sources
(Dolby Digital, DTS, etc.)
In the case of standard playback of multi channel sources, the
AVR-4810CI recognizes the format of the multi-channel audio
input signal and automatically operates the appropriate decoder for
surround sound.
n