Denon AVR-4810CI - Direct Playback; Surround Mode


Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsPlayback
Selecting the Surround Mode (Surround Mode)
The desired mode according to the program source and viewing situation
can be selected from among 10 DENON original surround modes.
1
Playing the source (vpage 66).
2
Select the surround mode by pressing DSP
SIMULATION.
MULTI CH STEREO
WIDE SCREEN
SUPER STADIUM
ROCK ARENA
JAZZ CLUB
CLASSIC CONCERT
MONO MOVIE
VIDEO GAME
MATRIX
VIRTUAL
: This mode is for enjoying stereo sound from all
speakers.
: This mode is for enjoying the atmosphere of
viewing a movie on a large screen.
: This mode is suited for viewing sports programs.
: This mode is for enjoying the atmosphere of a live
concert in an arena.
: This mode is for enjoying the atmosphere of a live
concert in a jazz club.
: This mode is for appreciating classical concert
programs.
: This mode is for playing monaural movie sources
with surround sound.
: This mode is suited for achieving surround sound
with video games.
: This mode lets you add a sense of expansion to
stereo music sources.
: This mode is for enjoying surround effects using
only the front speakers or headphones.
z : When playing sources recorded in monaural in the “MONO
MOVIE” mode, the sound will be off balance with a single
channel (left or right), so input to both channels.
z
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
e Direct Playback
In this mode the signals bypass the tone control circuitry for high
quality sound.
The sound is output to the same channels as the input signal.
Input signal
The indication contents of
the display
Analog signal /
PCM (2ch) /
Dolby Digital source /
DTS source /
Other 2-channel digital signals
DIRECT
DSD (2ch)
DSD DIRECT (
z
)
PCM (multi ch)
MULTI CH DIRECT
MULTI CH DIRECT + Dolby EX
MULTI CH DIRECT + PL
g
x CINEMA
MULTI CH DIRECT + PL
g
x MUSIC
MULTI CH DIRECT 7.1
DSD (multi ch)
DSD MULT DIRECT (
z
)
z : When DSD signals are converted to PCM signals as set by the
audio parameters and speaker settings, “DIRECT” or “MULTI CH
DIRECT” is displayed.
For details, see page 127.
1
Playing the source (vpage 66).
2
Press DIRECT/STEREO to select the “DIRECT”.
Displaying the Currently Playing Surround Mode
w Playing in a DENON Original
Surround Mode
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
DIRECT/STEREO
PURE DIRECT
DSP SIMULATION
[ MAIN]
DIRECT/STEREO
PURE DIRECTDSP SIMULATION