Denon AVR-4810CI - Connecting the Recording Components

0
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsConnections
Connecting Devices
Connecting the Recording Components
Digital Video Recorder
Select the terminal to use and connect the device.
When recording analog audio, use the analog connection.
See page 80 “Recording on an External Device (REC OUT mode)” for operating instructions.
•
•
•
Video Cassette Recorder
Select the terminal to use and connect the device.
When recording analog audio, use the analog connection.
See page 98 “Recording on an External Device (REC OUT mode)”
for operating instructions.
•
•
•
R
L
R
L
R
L
R
L
3- 3-
065
*/
"6%*0"6%*0 7*%&07*%&0
065 */
015*$"-015*$"-
*/
"6%*0"6%*0
065
7*%&0 7*%&0
$0.10/&/57*%&0
: 1# 13
065
47*%&0
065
47*%&0
*/
Digital video recorder
NOTE
To record video signals through the AVR-4810CI, use the same type
of video cable for connection between the AVR-4810CI and the player
as the cable used for connection between the AVR-4810CI and the
recorder.
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 58)
Set as Necessary
R
L
R
L
R
L
R
L
3-
065
"6%*0 7*%&0
"6%*0
3-
*/
"6%*0
"6%*0
065
7*%&0
47*%&0
065
7*%&0
*/
7*%&0
47*%&0
*/
Video cassette recorder
NOTE
To record video signals through the AVR-4810CI, use the same type
of video cable for connection between the AVR-4810CI and the player
as the cable used for connection between the AVR-4810CI and the
recorder.
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 58)
Set as Necessary
For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI Terminals” on page 17.
For instructions on HDMI connections, see “Connecting Devices
Equipped with HDMI Terminals” on page 17.