What to do if there is no audio output with HDMI connection on my Denon AVR-E400?
Check the connection of the HDMI connectors. To output HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. To output HDMI audio from a TV, set “HDMI Audio Out” on the menu to “TV.”
What to do if the Denon AVR-E400 power does not turn on?
First, check if the power plug is correctly inserted into the power outlet. If it is, the protection circuit might be active. Disconnect the power plug from the electric outlet, wait 5 to 10 seconds, and then re-insert it.
What to do if no sound is produced from front height speakers on my Denon AVR-E400 Receiver?
Check if “Assign Mode” is set appropriately to output audio from the front height speakers. Set “Speaker Config.” – “Front Height” on the menu to something other than “None.”
What to do if my Denon AVR-E400 Receiver is not producing sound from surround back speakers?
Check if “Assign Mode” is set appropriately to output audio from the surround back speakers. Set “Speaker Config.” – “Surr. Back” on the menu to something other than “None”. Also, ensure the sound mode is not set to “STEREO” or “VIRTUAL.”
Why the volume does not increase on my Denon Receiver?
The maximum volume may be set too low. Adjust the maximum volume using “Limit” on the menu. Also, check if the power for external devices connected to the unit's output connectors is turned on.
How to fix if Dolby TrueHD, DTS- HD, Dolby Digital Plus audio is not output from Denon Receiver?
Make HDMI connections.
What to do if my Denon AVR-E400 is not producing DTS sound?
Set “Decode Mode” on the menu to “Auto” or “DTS.”
What to do if my Denon Receiver is not producing sound from surround speakers?
Check if the surround speakers are connected to the SURROUND terminals.
What does it mean if the power indicator is blinking red in intervals of approximately 2 seconds on my Denon AVR-E400, and what should I do?
The protection circuit is activated due to a temperature rise within the unit. Turn off the power, and re-apply it after the temperature has sufficiently fallen. Re-install the unit in a place with good ventilation.
Why does my Denon AVR-E400 Receiver automatically switch to standby mode?
The sleep timer may be set. Turn the power on again or change the sleep timer settings. Also, “Auto Standby” is triggered when there is no operation for a set amount of time. To disable “Auto Standby”, set “Auto Standby” on the menu to “Off.”
General| HDMI Inputs | 6 |
|---|---|
| HDMI Outputs | 1 |
| 3D Pass-through | Yes |
| 4K Pass-through | Yes |
| Dolby TrueHD | Yes |
| DTS-HD Master Audio | Yes |
| Audyssey MultEQ | Yes |
| Network Connectivity | Yes |
| AirPlay | Yes |
| DLNA | Yes |
| Input Impedance | 47 kOhms |
| Input Sensitivity | 200 mV |
| Signal-To-Noise Ratio | 100 dB |
| Response Bandwidth | 10 Hz - 100 kHz |
| THD | 0.08% |
| Tuner Presets | 56 |
| Tuner Bands | AM/FM |
| Frequency Response | 10 Hz - 100 kHz |
| Video Upscaling | Yes |
| Bluetooth | No |
| Wi-Fi | No |
| Surround Sound Effects | DTS Neo:6 |
| Audio D/A Converter | 192kHz/24-bit |
| Inputs | HDMI, Digital Optical, Digital Coaxial, Analog |
| Outputs | HDMI, Headphones |
Read, keep, heed, and follow all instructions for safe operation.
Avoid high temperatures, handle cords carefully, keep unit dry, and unplug when unused.
Check all connections, ensure no problems with cables before powering on.
Details connecting devices using HDMI cables for high-quality playback.
Describes alternate connection methods for devices without HDMI.
Explains how the unit converts various video signals for HD output.
HDMI connections transmit high-definition video and audio via a single cable.
Guides on connecting the unit to a TV via HDMI, considering ARC function.
Details the cable and interface for connecting the unit to a TV via HDMI.
Illustrates connecting various video devices to the unit via HDMI.
HDMI uses a single cable for audio and video, simplifying wiring.
Enables operations like power control and volume adjustment between HDMI devices.
Explains how ARC transmits TV audio back to the unit via HDMI cable.
Specifies settings needed for TVs supporting the ARC function.
Lists supported advanced HDMI functions like 3D, ARC, and Content Type.
Details the ARC function for returning audio signals from TV to receiver.
How to make various settings related to HDMI connections.
How to connect a TV that does not support ARC via HDMI or optical connection.
How to connect a set-top box without HDMI.
How to connect a DVD player without HDMI.
How to connect iPod and USB memory devices to the unit's USB port.
How to connect a CD player using digital or analog cables.
Instructions for connecting FM and AM antennas for radio reception.
Available methods for connecting audio to the unit.
Lists the necessary system components for network connection.
Requirements for a broadband internet connection.
Instructions for connecting speakers to the unit.
Guides through Audyssey Setup for automatic speaker optimization.
Steps to prepare for Audyssey Setup, including microphone placement.
Continues preparation steps for Audyssey Setup.
How to check the measurement results and equalizer characteristics.
Steps for connecting to a home network and automatic setup.
Specific settings for setting up the subwoofer for Audyssey.
Details the automatic detection and measurement phase of Audyssey Setup.
How to adjust the master volume level.
Procedure for playing back content from a Blu-ray or DVD player.
How to play music from an iPod connected via USB.
How to play music and view photos from a USB memory device.
How to play music files stored on a PC or NAS.
How to stream music from Apple devices using AirPlay.
How to select the desired input source for playback.
Procedure for playing back content from a CD player.
How to listen to music stored on an iPod.
How to switch between iPod browse modes for TV display.
Steps for playing music files and viewing image files from USB.
Explains modes for receiving FM broadcasts: Auto, Manual, and Direct Tune.
How to preset and save favorite radio stations.
How to automatically tune and preset radio stations.
Step-by-step guide for tuning into FM/AM radio stations.
How to listen to Internet Radio stations from around the world.
How to use vTuner to search for stations and add them to favorites.
How to apply settings to share music files from PC and NAS.
Steps to share media files stored on a PC.
Instructions for sharing media using Windows Media Player 12.
Instructions for sharing media using Windows Media Player 11.
How to change NAS settings to allow access from other devices.
How to view photographs shared by users or all content on Flickr.
How to view all photographs shared on the Flickr site.
Guide to setting up and listening to Pandora.
Guide to setting up and listening to Spotify, requires Premium subscription.
Information on viewing Flickr photographs shared by users.
Steps to view photographs shared by specific Flickr users.
Steps to obtain a Pandora account and associate it with the unit.
How to listen to SiriusXM radio, requires an account.
How to listen to Pandora, requires an account and machine association.
How to access SiriusXM programming, requires an account.
How to enjoy Spotify music, requires a Premium subscription.
Ways to add content to favorites.
Streaming music from iPhone, iPod touch, or iPad directly to the unit.
How to play iTunes music stored on a computer.
How to select listening modes by pressing MOVIE, MUSIC, or GAME buttons.
Explains various surround sound modes available.
Explains various Dolby listening modes and their features.
Describes modes like MULTI CH STEREO, ROCK ARENA, JAZZ CLUB, etc.
Explains various DTS listening modes and their features.
Guides through advanced speaker installation, connection, and setup.
Explains advanced playback functionalities.
Explains how to install speakers based on system configuration.
Guides on connecting speakers to the unit.
How to set up speakers, including Audyssey Setup.
Detailed steps for connecting speaker cables correctly.
How to select channels to be used in speaker setup.
How to connect the measurement microphone for setup.
How to assign power amplifiers to different speaker configurations.
Explains how HDMI control (CEC) links device operations.
How to set the unit to automatically switch to standby after a set time.
How to save and recall custom settings for input, volume, and sound mode.
Step-by-step guide to setting up HDMI control function.
Lists operations controllable via HDMI control.
Adjusts sound quality based on volume level and room acoustics.
Solves volume variations between programs by automatic adjustment.
How to adjust surround sound field effects.
Compensates for room acoustics based on measurements for optimized sound.
Links operations with devices connected to HDMI and supporting HDMI Control.
Adjusts picture quality like contrast, brightness, saturation, and hue.
Makes settings for HDMI video/audio output.
Makes screen-related settings for video output.
Converts input video signals for HD output.
Changes input connector assignments for sources.
Adjusts speaker settings, including Audyssey setup.
Sets the volume of the test tone to be the same when output from each speaker.
Sets the maximum frequency of bass signal output to the subwoofer.
Guides through Audyssey Setup for automatic speaker optimization.
Allows manual setup or adjustment of settings made in Audyssey Setup.
Selects power amplifier usage method to match speaker system.
Indicates speaker presence and selects speaker size categories.
Helps identify and resolve common problems.
Microphone jack for setup procedures.
Buttons for recalling saved settings.
Terminals for connecting speakers.
Connectors for HDMI signals.
Connector for home network (LAN) connection.
Button to set the sleep timer function.
Table showing speakers used and parameters adjustable per sound mode.
Table showing input signal types and corresponding sound modes.
Improves sound quality at low volumes by considering human perception.
Solves volume variations by automatic adjustment.
Room equalization solution for optimal system performance.
High definition audio technology for faithful reproduction of studio masters.
High-Definition Multimedia Interface for AV digital connections.
Lossless audio format providing faithful reproduction of studio masters.
Basic checks before troubleshooting: connections, operation, and other devices.
Troubleshooting for common general issues.
Troubleshooting specific to HDMI connections.
Troubleshooting steps when no audio is produced.
Troubleshooting steps when no sound from surround speakers.
Troubleshooting steps when no sound from surround back speakers.
Troubleshooting steps when no sound from front height speakers.
Troubleshooting steps when no sound from the subwoofer.
Troubleshooting when Audyssey features cannot be selected.
Troubleshooting when Audyssey Dynamic EQ/Volume cannot be selected.
Troubleshooting reception issues like noise or distortion.
Troubleshooting when iPod cannot be played via USB.
Troubleshooting USB device recognition issues.
Troubleshooting when files on USB device cannot be played.
Troubleshooting Internet Radio connection or playback issues.
Troubleshooting playback issues for files stored on a computer.
Troubleshooting playback issues for music stored on a NAS.
Troubleshooting server connection issues.
Troubleshooting connection issues with preset or favorite radio stations.
Troubleshooting when a list of broadcasting stations is not displayed.
Troubleshooting connection issues with specific radio stations.
Troubleshooting Pandora login issues.
Troubleshooting when the set is unresponsive to the remote control.
Provides technical specifications of the unit.
Details specifications for the audio section, including power amplifier and output connectors.
To Next Page
