Denon AVR-X1000 User Manual

115
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Speakers
Setting items Description Page
Audyssey
®
Setup The acoustic characteristics of the connected speakers and listening room are measured and the optimum
settings are made automatically.
136
Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
145
Speaker Config. Indicate speaker presence and select speaker size categories based on bass reproduction capability.
145
Distances Set distance from listening position to speakers.
146
Levels Set the volume of the test tone to be the same when it is output from each speaker.
146
Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer.
147
Bass Set subwoofer and LFE signal range playback.
148
2 Network
Setting items Description Page
Information Display network information.
149
IP Control Enables network communication in standby power mode.
149
Friendly Name The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name
according to your preferences.
149
Settings Make settings for wired LAN.
150
Diagnostics Used to check the network connection.
151
Maintenance Mode Use when receiving maintenance from a Denon service engineer or custom installer.
152

Denon AVR-X1000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Composite video in	2
Ethernet LAN (RJ-45) ports	1
Multichannel audio output type	RCA
Connectivity technology	Wired
AM antenna ports quantity	0
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPS
Wi-Fi	No
Supported radio bands	FM
Internet radio services supported	vTuner
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPhone
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	390 W
Cables included	AC

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	151 mm
Weight	8200 g