Denso BHT-1600 - Page 168

156
BHT-1600 Handy Terminal User Manual
GS1 DataBar
Expanded
Switch to enable GS1 DataBar Expanded decoding. Enable
Separator Character
Enable the function code character separator, which is
used to separate data fields of variable length and
application identifiers of subsequent data fields in
concatenated data strings.
None
Security Level There are setting options from Level 0 to 3 Level 1
KOREAN 3 OF 5
Korean 3 of 5 Disable
MSI
MSI Disable
MSI Switch to enable MSI decoding. Disable
Length option Sets the length of the MSI symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)
 Max / Min Length (range: 0-55; Length 1<Length 2)
 Any Length
Max / Min
Length
(4-55)
Verify Check Digit One check digit is mandatory for decoding MSI barcodes.
Select whether a second check digit should be verified. If
the check digits are incorrect, the barcode wi
ll not be
accepted.
 One Check Digit
 Two Check Digits
One Check
Digit
Transmit Check Digit
Decide whether to include the check digit in the data
being transmitted.
Disable
Algorithm
When two check digits are set for verification, two
choices are available for the pair of check digits.
 Modulo10 / Modulo11
 Double Modulo 10
Double
Modulo 10
POSTAL CODE
Australian Postal Disable
Japan Postal Disable
Netherlands KIX Code Disable
US Postnet Disable
US Planet Disable
USPS Postal Disable
UPU FICS Postal Disable
UK Postal Disable
Postal General Preference Enable
US Postal Check Digit
Decide whether to transmit check digit for US Postnet or
US Planet.
Disable