102
Appendix C—Troubleshooting ELITEpro XC Driver Installation
If you have connected the ELITEpro XC to a computer via the USB cable and the driver fails to install,
follow these steps to correct the problem.
1) Go to the Device Manager by right-clicking My Computer in the Start Menu and selecting
Properties.
2) In the Properties window, select Device Manager. In Windows 7 and Windows 8, the Device
Manager is on the left side of the window. In Windows XP, select the Hardware tab, then select the
Device Manager. See below.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...