DENT Instruments ELITEpro XC User Manual

113
The default call schedule shown above is a Single Call on January 1st at 00:00 (Midnight). Because the
Append New Data button is selected, when the PC calls the logger only the “new” data in the logger
stored since the last data download will be retrieved.
Logger Tasks
Set Logger Clock—If the Set Logger Clock box is checked then, after the PC calls the logger and the data
download is complete, the PC will set the logger clock to the PC time.
Download Data—Data retrieval may be one of two options: Download All Data or Append New Data.
Append New Data is used for on-going metering projects and only data collected and stored in the
logger since the last download is retrieved. The new data is appended to the existing data file.
Create .csv File—If it is desired to have the downloaded data also be created in a .csv (Comma
Separated Value) format for use in other applications such as Excel, check this box. Creating a .csv does
not affect the original .elog file downloaded from the logger.
D
ID
Y
OU
K
NOW
? When appending a data file, AutoPoll looks in the data folder specified in the Tools >
PC Setup for that logger. If the data file has been moved or this is the first time the logger has been
read and Append New Data is selected, then AutoPoll will download the entire memory of the
logger.
w ww. . com
information@itm.com1.800.561.8187

DENT Instruments ELITEpro XC Specifications

General

Brand	DENT Instruments
Model	ELITEpro XC
Category	Data Loggers
Language	English