Derby cycle Impulse Evo - 3.9.1 Belt tension

Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4 EN-21
3.4 Adjusting the sprung seatpost
DANGER
It is best to ask your cycle dealer to adjust the suspension elements of
the seatpost.
1. Remove the seatpost.
2. Tighten the suspension adjustment screw with an Allen key (6 mm
AF) in the clockwise direction to reduce the suspension or loosen
anticlockwise to increase the suspension.
DANGER
The suspension adjustment screw must not
protrude from the seatpost, otherwise the
screw/seatpost can loosen – if this happens
whileridingyoucouldfallo,resultingin
serious injuries.
Suspension
adjustment
screw
Screw must not protrude
from the seatpost
3.5 Adjusting the height and angle of the handlebars
DANGER
Ask your cycle dealer to perform these adjustments. You can otherwise
run the risk of loosening the handlebars which could lead to a fall
causing severe injuries.
3.6 Switchingthelightsonando
*
A slider control is located on the rear of the front light. Depending on
whichwayyoumoveit,thefrontandrearlightwillbeonorowhenyou
are riding.
*dependent on model