EN-40 Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
Measurements are taken whilst the cycle is being ridden.
The display calculates from the readings of the last 20
kilometres ridden an average value. This value is then used
as the basis for the remaining range. So the remaining range
displayed is heavily dependent on the riding style over the
last 20 kilometres.
Symbol Battery charge level
100–75%
74–50%
49 – 25%
24 – 10%
0%
5.5 Changing assist mode
1. You must be in the start menu to change the assist mode. Select the
levelofassistyourequirebybrieypressingthe
/ buttons.
Display Assist Power consumption
ULTRA
*
Assist function is working with
maximum power
Very high
POWER
Assist function is working hard High
SPORT
Assist is working with medium power Medium
ECO
Assist is working with low power Low
OFF
No assist Very low
2. Assist starts working as soon as you start pedalling. Assistance is
deactivated as soon as you stop pedalling or you reach a speed of
25 km/h.
Impulse Evo (Smart) display
Underneath the assist level selected is a display area showing the current
assist level from the drive unit in the form of ten bars having increasing
heights. The more bars are dark, the higher the assist level being provided.
This display is only shown when an assist mode is selected.
To Next Page
Loading...
