EasyManua.ls Logo

Derby cycle Impulse Evo - 5.2 Inserting and locking the battery

Derby cycle Impulse Evo
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4 EN-35
3.12.1 Lockout system
Ifyoursuspensionforksarettedwitha
lockout system, it is possible to lock the
suspension. There are some riding situa-
tions where that can be useful: for ex-
ample, if you are riding up a hill or if
you are standing up from the saddle
when accelerating. To switch the sus-
pensiontoxed,turntherotarycontrol
on the right-hand side of the fork to
‘LOCK’ (or alternatively: $). To reactiva-
te the suspension, turn the control to
the ‘OPEN’ position.
LOCK/$
Suspension locked
OPEN Suspension activated
DANGER
Do not ride over rough terrain with the suspension locked. It can
damagethesuspensionforks.Abrokenforkcouldcauseyoutofallo
and seriously injure yourself.
3.11.5 Tyres
DANGER
Donoteitheroverinateorunderinatethetyres. If the air pressure
is too high, this could lead to a worst-case scenario of the tyres
bursting and you could fall. On the other hand, if the air pressure
is constantly too low, the tyre can wear prematurely. The maximum
permissible pressure is marked on the side of the tyre in bar and psi
(pounds per square inch). You can measure the tyre pressure yourself
by using a tyre gauge. Alternatively, you can contact your cycle dealer.
3.12 Suspension fork
*
The suspension forks support the front wheel.
The distance travelled by the wheel between its unloaded
and fully loaded positions is called the total suspension
travel.
Model year 2015/2016 Version 18/12/2015
*dependent on model

Table of Contents

Related product manuals