Derby cycle Impulse Evo - Storage

Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4 EN-89
Charging a smartphone: Connecting a smartphone to your Impulse Evo /
Impulse Evo Next Smart display to charge it also requires power.
9.4.2 Storage
1. Remove the battery from the pedelec.
2. Store the battery in a dry, not excessively warm room. The battery
should not be exposed to direct sunshine. The recommended storage
temperaturerangeis18to23˚C.
IMPORTANT
The battery should not be stored in a fully charged state. A charge
levelbetween50and70%(

) is ideal. Since the battery loses
charge very slowly, you should recharge it when only one or two LEDs
come on, but after six months at the latest.
Riding style: A low pedalling speed combined with high gears results in
high power consumption.
Change down in good time to maintain constant cadence,
especially when starting.
Yourtnesslevel:Thetteryouare,thelessassistanceyouwillneed.
Total weight: The lower the total weight supported by the bike, the easier
it will be to ride  VI.I Overall weight Page EN-10.
Outside temperatures: The lower the outside temperatures (e.g. cold in
winter), the shorter the range.
Insertthebatteryjustbeforestartingowithyourpedelec.
This way you prevent low temperatures shortening the
range.
Battery capacity: A much shorter service life after the charging process
indicates that the battery has lost considerable capacity.  9.3.1.2
Capacity Page EN-85.
The battery may have to be replaced. Discuss how to
proceed with your cycle dealer.
Route selected: You need to pedal harder when cycling uphill or against
strong head wind. This is registered by the power sensor, which in turn
requires the motor to work harder.