Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4 EN-97
Description Cause Remedy
Some of the display is missing. The display is faulty. Enable the test display 6.4.3.22 Impulse Evo (Smart) display: Version Page EN-68. The display may have to be
replaced. Please contact your cycle dealer.
Display lighting not working. The display is faulty. Please contact your cycle dealer. The display may have to be replaced.
The display is misted up. Moisture has got in. Dry out the pedelec complete with display at room temperature (19 - 21°C). If the display is still misted up,
contact your cycle dealer. The display may have to be replaced.
Smartphone cannot connect to Impulse
Evo / Impulse Evo Next Smart display.
a) The requirements for connecting
your smartphone to the Impulse
Evo / Impulse Evo Next Smart
displayarenotsatised.
a) Check the technical requirements of your smartphone 7.1 Technical requirements Page EN-72.
b) The pedelec software is not up
to date.
b) Contact your cycle dealer for a software update.
c) The distance from the
smartphone to the display is too
long.
c) Shorten the distance from the smartphone to the display (to a maximum of 3 metres).
d) The Bluetooth module of the
display is faulty.
d) Contact your cycle dealer.
e) The Impulse E-Bike navigation
app is not up to date.
e) Download the latest version of the Impulse E-Bike navigation app 7.3 Installation Page EN-74.
f) The smartphone has “crashed”. f)Switchothesmartphone(removeandreinsertitsbatteryifnecessary)andrestartit.
g) The Bluetooth function on your
smartphone is disabled.
g) Enable the Bluetooth function on your smartphone.
Motor assist level is too weak. a) Climb assist is set too low. a) Change the value 6.4.3.16 Climb assist Page EN-66.
b)Batteryisat. b) Install new/charged battery 10.3.1 Charging a battery Page EN-93.
c)Unsuitablerideprole. c)Changetherideprole 6.4.3.17 Ride profile Page EN-66.
Motor idles. a) Gear changing is not properly
set.
a) Check the gears. Contact your cycle dealer.
To Next Page
Loading...
