DS2460Q QAM Analysis Meter Operation Manual
26
Figure 4-8
Press
save the new name and quit rename
operation,
is backspace, to correct you input
contents, press
, don’t save and quit. After you
quit, continue press
(SELECT) to set the current
cursor position channel plan as the default channel
plan, the symbol “√” is marking on this channel plan.
Press the
(ENTER) or enter create or
learn channel plan function. The Figure 4-11 and
Figure 4-12 show the LEARN USER PLAN screen.
The channel name use digital or standard name. In
Figure 4-9 and Figure 4-10 show the channel digital
name and standard name difference. Press
To Next Page
Loading...
Need help?
General
