KRYPTON®
TECHNICAL REFERENCE MANUAL
Hint
To transfer the most power, you should connect a longer ECAT cable (e.g. 50 m) before the power
Injector and shorter ECAT cable (e.g. 1 m) to the next device, so the voltage drop will be on the
shorter cable.
Power injector
Hint
When preparing a system please use our ECAT calculator , which you can find in the configurator,
to calculate the power consumption of the system, and make sure if any additional ECAT power
injector is needed in the Krypton chain.
KRYPTON® V20-1 119 / 141
To Next Page
Loading...