DEWESOFT Krypton - ECAT Power Injector

/
KRYPTON® 
TECHNICAL REFERENCE MANUAL 


7.4. ECAT Power Injector 
The ECAT Power Injector box (article number: ECAT-POWER-INJECTOR) can be used to inject power into               
the Ethernet connection between KRYPTON modules, when you can have a very long measurement              
chain. 

Connector Label 
Connector type 
Info 
PWR 
8-pin LEMO female 
Max. 48 VDC 
↓ EtherCAT In 
↑ EtherCAT Out 
8-pin LEMO 
Power and Data connection to your KRYPTON module/s 
use any of the ECAT to ECAT expansion cables (e.g. 
L1T8m-L1T8f-10M) 
GND 
Banana 
Ground connection 


ECAT Power injector 










KRYPTON® V20-1 96 / 141  