KRYPTON®
TECHNICAL REFERENCE MANUAL
5. KRYPTON modules
KRYPTON are small, rugged and modular data acquisition modules for field measurements and harsh
environments. Traditional DAQ systems are single boxes with many input channels, which means long
and expensive sensor cabling is needed. KRYPTON takes the opposite approach. We kept the same
advantages of other Dewesoft DAQ devices (plug and play, sensor auto-detection), but we are bringing
DAQ units closer to the origin of data - near the sensors. That greatly reduces the cost of the sensor
cabling, chances of wiring errors and greatly improves the signal quality.
KRYPTON DAQ modules are extremely robust. We machine each one out of aluminium bricks and install
industrial grade electronics. Units are then sealed with thermally conductive and electrically isolative
rubber. As a final touch we add rubber band around the KRYPTON chassis to further protect the unit
from the shocks. The result is IP67 degree of protection. Units are waterproof, vibration proof, and can
withstand shocks up to 100 G. KRYPTON can operate in extremely harsh environments and is rated to
work in a temperature span from -40 °C to +85 °C. Extensive testing in our laboratories ensures
bulletproof quality and worry-free testing under extreme conditions.
KRYPTON DAQ modules are designed to be as small as possible and very flexible. Their small size allows
them to fit perfectly in tight places and can be placed near the sensors. This results in short sensor
cables which will not only save cost but also improve the signal quality.
KRYPTON® V20-1 27 / 141
To Next Page
Loading...