DEWESOFT Krypton - CAN: Controller Area Network; CAN: specifications

To Next Page

To Previous Page

KRYPTON® 

TECHNICAL REFERENCE MANUAL 



5.4. CAN: Controller Area Network 

KRYPTON CAN interfaces are intended for CAN-FD and CAN acquisition in harsh environments.             

KRYPTON CAN devices support OBDII, J1939 standard protocols and can output CAN messages. 

5.4.1. CAN: speciﬁcations 



KRYPTONi-2xCAN-USB 



KRYPTONi-2xCAN USB 

CAN ports speciﬁcation 

Number of ports 

2 

Interface type 

CAN 2.0B 

Interface data rate 

up to 1 Mbit/sec 

Special protocols 

OBDII, J1939, CAN out 

Sampling rate 

> 10 kHz per channel 

Software selectable 

Galvanic isolation 

(Sensor supply not isolated) 

Isolated 

Bus pin fault protection 

±36 V 

Power speciﬁcation 

Power supply 

6 - 50 V DC 

Startup voltage 7 V 

Maximum sensor power consumption 

5 W max total 

(max 3 W on 15 V) 

Maximum power consumption 

5.5 W 

Environmental speciﬁcation 

Interface 

USB 2.0 

Connector type 

9 pin D-SUB 

Physical dimensions 

213 x 54 x 56 mm (slice) 

213 x 54 x 71 mm (with connectors) 

Weight 

1050 g 

2.30 lbs 

Operating temperature 

-20 °C to +60 °C 

Storage temperature 

-40 °C to +70 °C 

Humidity 

- 

IP protection 

IP65 / IP67 



 

KRYPTON® V20-1 41 / 141  

Main Page

DEWESOFT Krypton - CAN: Controller Area Network; CAN: specifications

Table of Contents

Related product manuals