DEWESOFT Krypton - Pinout: PWR connector

/
KRYPTON® 
TECHNICAL REFERENCE MANUAL 


7.4.1. Pinout : PWR connector 


PWR connector: pin-out (8-pin LEMO female) 





Pin 
Name 
Description 
1 
- 
- 
2 
- 
- 
3 
- 
- 
4 
- 
- 
5 
VCC 
PWR OUT 
6 
VCC 
PWR OUT 
7 
GND 
Ground 
8 
GND 
Ground 

IN connector (on the device): EEJ.1B.308.CLD 
Mating connector (for the cable): FGJ.1T.308.CLL.1433 
7.4.2. Pinout : EtherCAT out connector 




ECAT connector: pin-out (8-pin LEMO female) 



Pin 
Name 
Description 
1 
TX_P 
Transmission + 
2 
TX_N 
Transmission - 
3 
RX_P 
Reception + 
4 
RX_N 
Reception - 
5 
VCC 
PWR IN 
6 
VCC 
PWR IN 
7 
GND 
Ground 
8 
GND 
Ground 

IN connector (on the device): EEJ.1B.308.CLD 
Mating connector (for the cable): FGJ.1T.308.CLL.1433 

KRYPTON® V20-1 97 / 141  