KRYPTON®
TECHNICAL REFERENCE MANUAL
12. Safety instructions
Your safety is our primary concern! Please be safe!
Caution
Be careful to not connect the power supply on both ends of the EtherCAT chain. This connection
will permanently damage the devices.
How to not connect the PS in ECAT chain
12.1. General Safety Instructions
Warning
The following general safety precautions must be observed during all phases of operation, service, and
repair of this product. Failure to comply with these precautions or with specific warnings elsewhere in
this manual violates safety standards of design, manufacture, and intended use of the product.
Dewesoft GmbH assumes no liability for the customer’s failure to comply with these requirements.
All accessories shown in this document are available as an option and will not be shipped as standard
parts.
12.1.1. Environmental Considerations
Information about the environmental impact of the product.
KRYPTON® V20-1 136 / 141
To Next Page
Loading...