DEWESOFT Krypton - Kryptoni-1 Xcan; Kryptoni-1 Xcan-FD

/
KRYPTON® 
TECHNICAL REFERENCE MANUAL 


5.4.3. KRYPTONi-1xCAN 
KRYPTONi-1xCAN is a single port CAN device that uses EtherCAT as an interface. 


KRYPTONi-1xCAN 

5.4.4. KRYPTONi-1xCAN-FD 
KRYPTONi-1xCAN-FD is a single port CAN-FD device that uses EtherCAT as a data interface. The CAN-FD                
supports high-speed CAN interface with data rates up to 8 Mbps. KRYPTONi-1xCAN-FD has galvanically              
isolated communication lines and an isolated sensor supply of +5 V and +12 V. Power limit for the sensor                   
supply is 1.4 W. 


KRYPTONi-1xCAN-FD 

 
KRYPTON® V20-1 43 / 141  