DEWESOFT SIRIUS User Manual

Getting started
You may get a Windows Security warning (see Illustration
14). You can safely click on 'Install this driver software
anyway' and continue the installation.
You may also get another Windows Security dialogue (see
Illustration 15). You can check the 'Always trust software
from “Dewesoft”' check-box and click the Install button
to continue the installation.
Illustration 14: Windows Security Warning
Illustration 15: Windows Security Dialogue
Before the installation of any drivers, you may see a
warning like this: After clicking OK, the driver will be installed:
Illustration 16: Driver installation warning
Illustration 17: Driver installation
When the DEWESoft® installation has completed
successfully, you will see the final screen: Make sure to restart your PC after the installation:
Illustration 18: Installer: Complete Illustration 19: Installer: Restart
After the restart you will notice that there is a new icon in the Windows task tray: it is the
DEWESoft® launcher which will pop up the DEWESoft® launcher program when you
connect a Dewesoft measurement device (e.g. SIRIUS®, DEWE-43, ..).
Doc-Version: 1.4.2 www.dewesoft.com Page 15/166
DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft®
measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation

DEWESOFT SIRIUS Specifications

General

Resolution	24-bit
Isolation	Channel-to-channel and channel-to-ground
Interface	USB
Software	DewesoftX data acquisition software
Bandwidth	DC to 50 kHz (depending on module type)
Humidity	non-condensing
Analog Inputs	Voltage, IEPE, Charge, Current, Strain Gage, Thermocouple, RTD, Resistance, LVDT, Bridge