HI, MI, WI-700 service manual - 2 - component parts
2-11 Issue 9 04/2020
5 port Ethernet switch
The 5 port Ethernet switch is the connection point for all labeller / printer that are to be connected to the
machine
The switch is supplied a voltage of 5v from the PC main board
Ethernet connection from
main board. Refer to p2-4 for
LAN connection point
Connect all other Ethernet Coms
labellers to this switch, 4 ports
available
The Ethernet
switch is powered
from the ATX
connection on the
main board
To Next Page
Loading...