HI, MI, WI-700 service manual - 2 - component parts
2-32 Issue 9 04/2020
Load cell
The load cell fitted to the scale unit can be either a 15kg or 30kg depending on the specification required for
the scale. NOTE: these capacities are not the machine/scales capacity. Typically this will be a machine
capacity of 6kg for the 15kg load cell and a machine capacity of 12kg for the 30kg load cell.
The load cell is supplied with a cable gland, fixing
plate and connecting plug fitted to the cable. This
assembly aids replacing this component if required.
Refer to section 4 - servicing for details of replacing
the load cell
With the scale conveyor removed, the scale deck can
be seen.
The load cell sits under the scale deck
Transit screw and corner
overload stops.
Refer to section 1 -
Installation for setting of
these.
To Next Page
Loading...