Digi 700 Series - Thermal Head Heaters (Signature)

HI, MI, WI-700 service manual - 2 - component parts
2-43 Issue 9 04/2020
Thermal head heaters - Signature labeller
On the Signature labeller thermal head heaters are fitted into the head assembly as standard.
There are two 24v heaters which are connected to the 24v power supply via two Molex connectors in the
rear of the labeller
The thermal head heaters are encapsulated into the head adjuster block
For the thermal head heater to operate,
connect the two Molex connector in the rear
of the labeller