HI, MI, WI-700 service manual - 2 - component parts
2-39 Issue 9 04/2020
Labeller - classic type
The Classic type labeller is an option fit instead of using the high speed labeller.
The example below has the 9 finger touch applicator fitted. Common parts exist between the High speed &
Classic labellers such as power supplies, labeller board, stepper motor, take-up motor & thermal head.
9 finger Touch
applicator
Thermal head
& platen roller
Backing paper take-up
Drive & pinch rollers
Label gap sensor
5.35 power
supply
24c DC take
up motor
Labeller board
Stepper motor
24v power supply
42v power supply
Power ON/OFF
switch
To Next Page
Loading...