Digi XBee User Manual

XBee/XBee-PRO® S2C ZigBee® RF Module
12
Maximum power and frequency specifications 284
OEM labeling requirements 285
Declarations of conformity 285
Antennas 285
IC (Industry Canada) 286
Labeling requirements 286
For XBee ZB surface-mount: 286
For XBee-PRO ZB surface-mount: 286
For XBee ZB through-hole: 286
For XBee-PRO ZB through-hole: 286
Transmitters for detachable antennas 286
Detachable antenna 287
For XBee S2D SMT: 287
RF Exposure 287
Australia (RCM) 288
ANATEL (Brazil) 288
South Korea 291
Migrating from XBee through-hole to XBee surface-mount devices
Pin mapping 296
Mounting 297
Manufacturing information
Recommended solder reflow cycle 300
Recommended footprint 300
Flux and cleaning 302
Reworking 302
Load ZigBee firmware on 802.15.4 devices
Background 304
Load ZB firmware 305
Definitions
ZigBee node types 306
ZigBee protocol 307

Digi XBee Specifications

General

Operating Frequency	2.4 GHz
RF Data Rate	250 kbps
Model	XBee S2C
Category	Control Unit
Operating Voltage	2.1 to 3.6V DC
Operating Temperature	-40 to +85 °C
Interface	UART
Dimensions	24.38 x 27.61 x 9.14 mm