Digi XBee3 802.15.4

AT commands SPI interface commands
Digi XBee3® 802.15.4 RF Module User Guide
105
P5 command
Sets or displays the DIO15/SPI_MISO configuration (Micro pin 16/SMT pin 17). This only applies to
surface-mount and micro devices.
Parameter range
0, 1, 4, 5
Parameter Description
0 Disabled
1 SPI_MISO
2 N/A
3 N/A
4 Digital output, low
5 Digital output, high
Default
1
P6 command
Sets or displays the DIO16/SPI_MOSI configuration (Micro pin 15/SMT pin 16). This only applies to
surface-mount and micro devices.
Parameter range
0, 1, 4, 5
Parameter Description
0 Disabled
1 SPI_MOSI
2 N/A
3 N/A
4 Digital output, low
5 Digital output, high
Default
1
P7 command
Sets or displays the DIO17/SPI_SSEL configuration (Micro pin 14/SMT pin 15). This only applies to
surface-mount and micro devices.