Digi XBee3 802.15.4 User Manual

Contents
Digi XBee3® 802.15.4 RF Module User Guide
Applicable firmware and hardware 12
Change the firmware protocol 12
Regulatory information 12
Get started
Verify kit contents 14
Assemble the hardware 14
Plug in the XBee3 802.15.4 RF Module 15
Unplug an XBee3 802.15.4 RF Module 16
Configure the device using XCTU 16
Configure remote devices 16
Configure the devices for a range test 18
Perform a range test 18
Configure the XBee3 802.15.4 RF Module
Software libraries 25
Over-the-air (OTA) firmware update 25
Custom defaults 25
Set custom defaults 25
Restore factory defaults 25
Limitations 25
XBee Network Assistant 26
Modes
Transparent operating mode 28
Serial-to-RF packetization 28
API operating mode 28
Command mode 28
Enter Command mode 29
Troubleshooting 29
Send AT commands 29
Response to AT commands 30
Apply command changes 30
Make command changes permanent 30
Exit Command mode 30
Digi XBee3® 802.15.4 RF Module User Guide
4

Digi XBee3 802.15.4 Specifications

General

Brand	Digi
Model	XBee3 802.15.4
Category	Control Unit
Language	English