Digi XBee3 802.15.4 User Manual

Frame descriptions TX Request: 16-bit address - 0x01
Digi XBee3® 802.15.4 RF Module User Guide
135
TX Request: 16-bit address - 0x01
Description
A TX Request message causes the device to transmit data as an RF Packet.
Format
The following table provides the contents of the frame. For details on frame structure, see API frame
format.
Frame data
fields Offset Description
Frame type 3 0x01
Frame ID 4
Identifies the data frame for the host to correlate with a subsequent TX
Status frame - 0x89. If set to 0, the device does not send a response.
16-bit
destination
address
5-6 Set to the 16-bit address of the destination device. Broadcast = 0xFFFF.
Options 7
0x01 = Disable ACK.
0x04 = Send packet with Broadcast PAN ID.
Set all other bits to 0.
RF data
8-n
The RF data length can be up to 116 bytes, but may be less depending on
other factors discussed in Maximum payload.

Digi XBee3 802.15.4 Specifications

General

Brand	Digi
Model	XBee3 802.15.4
Category	Control Unit
Language	English