Digi XBee3 802.15.4

AT commands Coordinator/End Device configuration commands
Digi XBee3® 802.15.4 RF Module User Guide
87
Bit Meaning Setting Description
2
Allow
Association
0 Coordinator will not allow any devices to associate to it.
1 Coordinator allows devices to associate to it.
3 -
7
Reserved
Default
0
SC command
Sets or displays the list of channels to scan for all Active and Energy Scans as a bit field. This affects
scans initiated in AS command and ED command commands in Command mode and during End Device
Association and Coordinator startup.
Parameter range
0 - 0xFFFF (bit field)
Note A parameter of 0 automatically scans the current channel configured by CH.
Bit field mask:
Bit IEEE 802.15.4 channel
0 Channel 11 (0x0B)
1 Channel 12 (0x0C)
2 Channel 13 (0x0D)
3 Channel 14 (0x0E)
4 Channel 15 (0x0F)
5 Channel 16 (0x10)
6 Channel 17 (0x11)
7 Channel 18 (0x12)
8 Channel 19 (0x13)
9 Channel 20 (0x14)
10 Channel 21 (0x15)
11 Channel 22 (0x16)
12 Channel 23 (0x17)
13 Channel 24 (0x18)
14 Channel 25 (0x19)
15 Channel 26 (0x1A)